by SK | 3 June, 2019 | Vulcan Case Studies & News
Vulcan S250 for Apartments Costa Marina apartments are in a very hard water area and required a single point solution in the plant room. Vulcan was selected due to its ease of installation with no disruption to the water supply and also for the positive results from a pilot installation. The Vulcan S250 system now protects the water heaters, the piping systems and also a major reduction of limescale in each...
by SK | 16 April, 2019 | Vulcan Case Studies & News
Vulcan S100 descaler for Salon de l‘immobilier Neuchâtelois The defined objective was mainly intended for the dumpsters of our two ice resurfacers, which are filled with snow all day long and therefore subject to weekly descaling.After a few weeks, we noticed that the scale adhered less. This makes it easier to clean our machines, saving us time and products.The test carried out allowed us to take the time to compare the positive effects of the Vulcan S100 on our installation and that the objective set was...
by SK | 30 January, 2019 | Vulcan Case Studies & News
Super U supermarkets choses Vulcan S25 descaler Vulcan S25 was installed on the water main to treat the whole building for problems caused by hard water and limescale deposits. The Vulcan S25 descaler helped to solve the scale problems in the kitchens and bathrooms and also prevented new scale deposits. Noticeable benefits have been observed in the cooking and baking areas especially where chemical use is not permitted. Vulcan also meets the high specification of Super U supermarkets to install eco-friendly...
by SK | 30 November, 2018 | Vulcan Case Studies & News
Hyundai Motors uses Vulcan S25 descaler for pipes, equipment and cooling towers Since Vulcan S25 was installed, the Hyundai Engineering Team has stopped the regular manual cleaning process.Observation: the flow rate with the Vulcan unit is now even higher than immediately after previous manual cleaning had been done. After Vulcan S25 had been installed for 6 months, the secondary pipes were opened: scale that had been left in piping had disappeared and all 9 secondary pipes had become clean (see photo).Observation: Biofilms in the cooling tower had disappeared since the Vulcan unit was...
by SK | 10 November, 2018 | Vulcan Case Studies & News
Kunlun Hotel uses Vulcan systems for limescale problems Kunlun Hotel is a five star hotel located in Beijing and uses Vulcan systems to solve the scale problems for the gas water heaters, the pipes and shower heads. It also helped to extend the cleaning intervals, save gas and improve...
by SK | 31 July, 2018 | Vulcan Case Studies & News
Plastic moulding factory uses Vulcan descaler to solve limescale problems After Vulcan S150 and S250 were installed, the clients are fully satisfied with their performance because they solved the scaling and iron filing problems on injection molding machines. The injection molding machine had been scaled badly for years, so it was always difficult to clean the pipe, especially the heat exchanger of the mold temperature controller. The traditional cleaning way is to use a chemical, but it is costly and difficult, and it also harms the heat exchangers and...
