by SK | 30 November, 2018 | Vulcan Case Studies & News
Hyundai Motors uses Vulcan S25 descaler for pipes, equipment and cooling towers Since Vulcan S25 was installed, the Hyundai Engineering Team has stopped the regular manual cleaning process.Observation: the flow rate with the Vulcan unit is now even higher than immediately after previous manual cleaning had been done. After Vulcan S25 had been installed for 6 months, the secondary pipes were opened: scale that had been left in piping had disappeared and all 9 secondary pipes had become clean (see photo).Observation: Biofilms in the cooling tower had disappeared since the Vulcan unit was...
by SK | 10 November, 2018 | Vulcan Case Studies & News
Kunlun Hotel uses Vulcan systems for limescale problems Kunlun Hotel is a five star hotel located in Beijing and uses Vulcan systems to solve the scale problems for the gas water heaters, the pipes and shower heads. It also helped to extend the cleaning intervals, save gas and improve...
by SK | 31 July, 2018 | Vulcan Case Studies & News
Plastic moulding factory uses Vulcan descaler to solve limescale problems After Vulcan S150 and S250 were installed, the clients are fully satisfied with their performance because they solved the scaling and iron filing problems on injection molding machines. The injection molding machine had been scaled badly for years, so it was always difficult to clean the pipe, especially the heat exchanger of the mold temperature controller. The traditional cleaning way is to use a chemical, but it is costly and difficult, and it also harms the heat exchangers and...
by SK | 19 July, 2018 | Vulcan Case Studies & News
Petroleum company uses Vulcan descaler in oilfield application Installation purpose – The gas heats the water in the furnace, then the hot water heats the tubes, so that the water temperature in the tubes rises from 40 °C to 70 °C. The water in the tubes passes through the pump, transported to various wells.However, the heat exchanger efficiency is decreasing because of scale in the tubes. More gas has to be used to heat the furnace, so that the energy consumption is increased. Result – After installing the Vulcan S25 for 6 months, we found that there is no additional electricity usage, and the overall heat exchanger efficiency is still at 80%. We approved Vulcan and will make the follow-up purchase for the whole...
by SK | 25 June, 2018 | Vulcan Case Studies & News
Vulcan installation at Barceló Bávaro Palace Hotels & Resorts Vulcan installation at Barceló Bávaro Palace Hotels & Resorts 2 x S100 in hotel’s main hot water lines3 x S250 for cooling towers4 x S500 for cooling towers Most of the hotels in the area of Bavaro/Punta Cana in eastern Dominican Republic depend on ground water wells for their domestic water supply, using traditional water softening equipment to reduce the scale and hardness of the water. The fact is that some of these resorts have very poor maintenance resulting in extensive scaling of cooling towers and domestic hot water piping and...
